Getting to know your pickup: a tool for measuring the frequency response of the impedance

(Note: this post has been updated to refer to the further developed newest version of the Pickup Wizard!!)

Here is something very useful and special:

GITEC member Helmut Keller (an expert in instrumentation for studio acoustics/electronics, and for RF,  and an avid guitar player) has put together an exciting tool for measuring our pickups:


Contrary to all those more or less useless (but unfortunately ubiquitous) DC-resistance measurements that cannot really tell much about the image a pickup will paint sonically, what we have here is a scientifically sound, highly relevant measurement of how the AC-impedance evolves over the auditory frequency range. The result is probably THE most important clue of how a pickup sounds.

What’s more, Helmut’s tool requires merely an ordinary computer with a reasonably good sound card (or audio interface) to run a few programs, and a VERY simple hardware measurement adapter that can be built (that term is almost an exaggeration!) by basically anyone – because it consists of nothing more than a few jacks/plugs, a bit of cable, and a single resistor, plus a switch.

Best of all, Helmut has given his software (as well as the accompanying article/manual/explanation he has written up: Pickup Wizard 1.0 to GITEC to post them here – completely free of charge!! You can download everything as a zip file, unzip it and sink your teeth (figuratively, please!) into getting some really significant measurements done!

By the way: those impatient ones that do not want to dwell much on science but like to dive into applying it right away, they may skip „the theory“ in Chapters 2 – 5 of the article/manual/explanation and fast forward to Chapter 6: putting the measurement adapter together.

Helmut has tested the software at length with his WINDOWS machines, and at GITEC we have started to test it with LINUX operating systems, and on the Mac, as well. With LINUX, we are making much progress: it seems that there are no problems. We are still testing on Macs but are confident that success can be established on these machines too.

In any case, Helmut is happy to receive our feedback, and already plans to issue an updated „professionalized“ version of the 🧙🏽‍♂️ soon. I liked Helmut’s contribution too much, though, to keep it from you and simply HAD to post it already now/here!

‚Nuff said!!

Here is all the material:

and here’s just the article/manual/explanation as a PDF-document for those who want to simply inform themselves first: Pickup Wizard 1.0 

Measure away, then, and have fun while really exploring your pickups!


Under the looking-glass: Measuring Pickups

Magnetic pickups for electric guitars really are very simple devices: a magnet, some wire wound as a coil within the magnetic field … that’s it. However, due to the specific circumstances around the electric guitar and ist amplification as it has historically evolved, these pickups have some idiosyncrasies that give them their sound. Of course, our ears are the real judges when it comes to that sound … but our ears have their limitations. Moreover … or rather to add to the issue,  a brain (hopefully 😉) is connected to these ears which brings perceptional psychology into play and many corresponding potentially ‚erroneous zones‘. Physics certainly can be of help to avoid some traps when judging the sound of pickups – specifically, make some measurements here and there can be most helpful. Beware, though: the very popular simple measurement of the ohmic resistance of pickup DOES NOT CUT IT! There’s more to consider, and this is what Helmut Lemme’s article on there matter is all about:

Measuring Guitar-Pickups

P.S.: this article was originally issued in the magazine SUSTAIN (May, 2013); we appreciate being given the permission to re-publish it here!


More on the Fender „Wide Range“ Humbucking Pickup: clones and the old competition

Our „wide-range“ journey continues … in the second article in the series about the Fender Wide Range Humbucking Pickup, we check out some clones of this device,  and we also consider the most relevant competition it faced when it came out back in the early 1970’s. So: more frequency plots and Q-factors coming right up …. see here!

A little managing of expectations: it will take a while until the posting of the third part of this series of articles … we plan to do some recordings, and compare sound samples … but first the annual GITEC meeting (  on Oct. 12 & 13 in Regensburg, Germany, needs to be organized and run and processed) …

Please stay tuned and do not loose patience!